Easy Operation

by

generators

Brand new have all the warranty. Decided to go with a bigger on for my business. Was going to use at home but don’t need that much power.

by

HND1.2CS I Single System Clam Kit Extended Run For Honda EU2000i/1000i Generator

HND1.2CS I Single System Clam Kit Extended Run For Honda EU2000i/1000i GeneratorReplacement for HND1.2CS Single System Clam Kit Fit For Honda EU1000i & EU2000i Generators Single System Clam Assembly 【Specific Application】The HND1.2CS Single System Clam Kit fits for Honda EU1000i & EU2000i Generators. Gives you the option of buying replacement for IPI Industries B.E.R.G. I Systems without the Attwood gas tank included. 【Strong Function】Replace for HND1.2CS B.E.R.G. I Single System Clam Kit. Helps to extend the runtime of the generator without having to constantly check the fuel levels, and the aluminum cover maintains a good seal. 【Superior Material】Made of exceptional performance and longer life steel, copper, aluminum alloy and rubber, with strong durability, ultimate corrosion resistance and anti-rust performance. High-quality materials allow it to be used for a long time. 【Package Includes】The Single System Clam Kit includes 1 gas tank cap, 1 fuel hose, 1 elbow fitting, 1 teflon tape, and 1 female coupler. ¡ª5 Pieces in total. HND1.2CS Single System Clam Kit Fits for Honda EU1000i & EU2000i Generator, replaces for HND1.2CS B.E.R.G. I Single System Clam KitGives you the option of buying a replacement for IPI Industries B.E.R.G. Systems without the Attwood gas tank included. Applicable Model: HONDA EU1000i GeneratorThe HND1.2CS Single System Clam Kit fits for Honda EU1000i Generator. Helps to extend the runtime of the generator without having to constantly check the fuel levels, and the aluminum cover maintains a good seal.Note: The HONDA EU1000i Generator is not included in the package. Applicable Model: HONDA EU2000i GeneratorThe HND1.2CS Single System Clam Kit fits for Honda EU2000i Generator. Helps to extend the runtime of the generator without having to constantly check the fuel levels, and the aluminum cover maintains a good seal.Note: The HONDA EU2000i Generator is not included in the package. Step 1: Cover the threaded portion of the elbow and the quick screw with waterproof tape, screw the elbow into the aluminum cover, and then screw the thread of the quick screw into the elbow.Step 2: Screw the screw assembly into the aluminum cover and screw the aluminum cover into the generator cover opening. Screw the threaded port of the hose into the port on the tank.Step 3: Connect the other end of the hose to the interface of the aluminum cover. HND1.2CS Single System Clam Kit Fits for Honda EU1000i & EU2000i Generator, replaces for HND1.2CS B.E.R.G. I Single System Clam KitThe Single System Clam Kit includes 1 gas tank cap, 1 fuel hose, 1 elbow fitting, 1 Teflon tape, and 1 female coupler. —5 Pieces in total.Made of exceptional performance and longer-life steel, copper, aluminum alloy, and rubber, with strong durability, ultimate corrosion resistance, and anti-rust performance. High-quality materials allow it to be used for a long time.BrandOrdertradeTypeSingle System Clam KitMPNHND1.2CSPower SourceBatteryFeaturesEasy OperationModelHonda EU1000i & EU2000iApplicationHome BackupPower Rating0.1 kWBattery IncludedNoItems Includednecessary fittingsManufacturer Warranty1 YearItem Weight0.455KGColorBlackFitmentFor Honda EU1000i & EU2000i GeneratorMaximum Power1.5 kWVoltage12 VBattery TypeNickel-Cadmium (NiCd)Assembly RequiredYesTank Capacity1.25 galBattery Life40 HoursNoise Level77 dBMaterialAlloy Steel

by

DYMBOX, NEW MODEL, Smoke generator 2,3 l with ashpan, generator for smoking

DYMBOX is an excellent choice for both amateurs and professionals. DYMBOX to DYMBOX is a smoke generator that will serve you for years. New – DYMBOX Smoke Generator 2.32 l with Ash Pan. The latest model of the DYMBOX generator with a capacity of 2.32 liters is equipped with an ash pan, which allows for quick and easy removal of ash without having to interrupt the operation of the device.

by

DYMBOX, Smoke generator, generator for smoking, 4 smoke

Shipping time to USA is about 10 days… Shipping time to UE is about 3-5 days… Shipping to Norway is about 3 weeks I offer to sell highly efficient large smoke generator DYMBOX to the smokehouse. GENERATOR is 40 cm high. It’s made of stainless steel fi 90 mm with a thickness of 2.0 mm. Capacity 2,32 liters. You can use this smoke generator for cold smoke from 3 to 6 hours on one refill, depending on pump performance settings (with settings for minimum pump and a pressed wooden chips small size of much longer). It is powered by a powerful pump, which is even smoke in large smoke houses above 1000 l. Also suitable for grills with lids (electric or gas ). It is powered by wooden chips different flavours and granulation ( its depend on You). The advantage of this type of generator is that the smoker need not much wooden chips. Unlike similar generators, this one does not have a permanently welded components that prevent cleaning. It is completely demountable, so it can be easily cleaned. The length of the tube entering to the smoker ( Smoke house) is 12 cm. For Smokers warm or hot will be enough to insert into the smoking chamber heater with thermostat or for example, electric grill, or most ordinary electric cooker with temperature control, then we have a professional smokehouses, You do not have to watch, nothing burnt. The kit offered SMOKE GENERATOR includes: – Smoke Generator. – Pump. – The power cable with a length. 1.5m high temperature resistant. – The smoking chips 1 kg per half day are enough smoking. – Lighter. You can buy wood chips on our online store dymbox.com DYMBOX device has been designed and developed to produces smoke for smoke chambers in the smokehouses as well as for barbeques during amateur smoking. For the device to work you only need to add fuel to smoking chamber. You can refuel it at any time without need to stop the generator. You only need to add woodchips, briquette or pellets. Smoke volume is adjusted by increasing or decreasing air pump efficiency. How it works: Our smoke generator is powered by solid fuel: smoking woodchips, pellets or briquette. Burning process takes place just above the smoking pipe in a hopper, across its entire diameter. Smoke produced during burning process through pump with proper efficiency is drawn down to hole in the smoking pipe and is then pumped into smoking chamber. The advantage of this solution is the fact that: 1. Fuel in our generator does not hang, but falls down loosely and freely during the burning process. Unlike to other generators, where smoking takes place well below smoking pipe and woodchips (that should burn) are blocked by smoking pipe, our generator has a grate above the smoking pipe. In Dymbox smoke generator there is no need to push the fuel as it does not get stuck. 2. By implementing such a solution, smoke produced from burning has no contact with pure fuel which is not yet involved in the burning process thus it does not saturate pure woodchips with tarry substances and dampness as it happens in similar smoke generators available on the market. They have low grate, where smoke before entering into the smoking chamber penetrates a few-centimetre-layer of fuel which is not yet involved in burning process and contaminates and dampens it. Thus dirty, grime and damp woodchips smoke our meat? 3. In the device, below side air-draw nozzles, there is an ash-pit for big amount of ash what enables to smoke longer (for several hours) without need to empty it. The generator can be fed with wood chips ranging in size from 2 mm to 12 mm. Using this size chips were made studies of PAHs (the content of harmful compounds including benzo(a)pyrene). Industrial design protected by the Polish Patent Office. Reproduction prohibited. Number PL 21072 31.12.2014 r.

by

HND1.2CS Single Fuel System Clam Kit Fit For Honda EU1000i &EU2000i Generator

HND1.2CS Single Fuel System Clam Kit Fit For Honda EU1000i &EU2000i Generator ✅APPLICATION: The HND1.2CS I single system clam compatible with Honda EU1000i/EU2000i generators. The kit can extend the runtime of the generator without having to constantly check the fuel levels. ✅FUNCTION: The gas tank cap and fuel hose kit can keep your EU1000i and EU2000i generators running for a long time, and the system does not modify or break your current OEM cap. ✅PACKAGE INCLUDE: The kit includes Include 1 gas tank cap, 1 fuel hose, 1 elbow fitting, 1 teflon tape, and 1 female coupler, a total of 5 pieces. ✅MATERIAL: The kit is made of quality material with steel, brass, Aluminum alloy, and rubber. Treated with anti-corrosion and high-temperature resistance, solid and durable. ✅Satisfaction Guarantee–100% satisfaction guarantee. Please feel free to contact us if you have any questions about our product. 1.All Payments must be Confirmed (Shipping and billing addresses must match) Payment is required within 7 days from the date of the auction ending. 2.We accept PayPal, MasterCard, Visa, American Express, Discover and etc payment. 1.Orders will be ship out within 1 business days via USPS, Or UPS. (Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. ) 2.All of the items are shipped from our Warehouse in USA.It will take about 3 to 5 business days to you. 3.Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description. 1.100% Satisfaction Guarantee: If you’re not 100% satisfied with our items, simply return it for a full refund in 60 days (Items must be in new condition and in original package). Kindly please feel free to contact us before return. 2.Return or Replacements: Support 12 months’ Warranty. All product will be tested in 100% before delivery. If the item is was damaged in transit, kindly please contact us for a replacement or refund (Excluding contrived damage or misuse). Any question, please don’t hesitate to let us know. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. your understanding and patience is much appreciated!

by

Champion Generator – 5000 watts

Champion Power Equipment 100496 5000-Watt Portable Generator. 6250 starting watts and 5000 running watts. Power up with Champion’s reliable recoil start, plus Cold Start Technology ensures a quick start in cold weather. Designed for safety with convenient push-to-reset circuit breakers and a low oil shut-off sensor. This unit includes 1.2-quarts of recommended 10W-30 engine oil. The reliable 292cc single-cylinder OHV Champion engine produces 6250 starting watts and 5000 running watts. It will run for up to 9 hours at 50% load when the 5.7-gallon tank of gasoline is full. Easily monitor power output and track maintenance intervals with Intelligauge, which allows you to keep track of voltage, frequency and operating hours. With a noise level of 74 dBA from 23 feet, which is a bit louder than a vacuum cleaner, this machine can handle most essentials in an outage. During your next project, you’ll be able to run multiple power tools at the same time so you can get the job done. All the outlets have covers for protection and include a 120/240V 30A locking outlet (L14-30R) and four 120V 20A GFCI protected household outlets (5-20R). There’s no need to worry about your equipment and appliances since the Volt Guard built-in surge protector prevents overloads and keeps your equipment safe from spikes in voltage. Champion’s thoughtful packaging and clear directions make setup hassle free. The foldaway handle installs easily with no tools necessary, while the included wheel kit with never flat tires make it a cinch to move your power where you need it. This generator is EPA certified and CARB compliant. This unit has less than 2 hours run time. The gasoline has stabilizer added. It has been recently test run. Original box available. Assembled Product Weight152.1 lbsAssembled Product Dimensions (L x W x H)30.10 x 25.70 x 25.20 Inches