Fit for Honda EU1000i/EU2000i generators. This product allows for extended running fuel tank connections, and the aluminum cover maintains a good seal. We support 12 months’ Warranty. your understanding and patience is much appreciated!
[Light and Portable] – With a 600W AC inverter, 288Wh LiFePO4 battery, and 9 outlets, it weighs only 9.5 lbs, making it an excellent companion for outdoor camping, road trips, or home emergencies. [70 Minutes AC Charging] – Elite 30 V2 supports 8 charging methods, including AC charging, solar charging and car fast charging. With super fast charging, it goes from 0% to 100% in just 70 minutes, without damaging the battery. [Power beyond Limits] – 1500W power lifting, which can easily power small electric heating appliances such as kettles and toasters, greatly extending usage possibilities. [Reliable UPS] – In an emergency power outage, the UPS mode switches seamlessly within just 10ms – virtually unnoticeable.
Specifications: ▶ Fitment Perfectly fit for Honda Generator EU2000i, EU2200IC, EU2200i, EU2000i Camo, EU2000i Companion, for Tacklife 2250w iPower 2000 Yamaha for Westinghouse iGen2600. The size of this cover is 14” length 10” width 15” height(14” x10” x 15”), you may check your generator size for more fitment. ▶ Durable Material Made of 420D polyester hydrophobic fabrics, this is a high strength and durable material which is weather-resistant, dust-proof and hard to tear apart. It also features an anti-UV waterproof PU coating for all season outdoor use. ▶ Convenient Design A tool pocket with a large capacity, very suitable for storing generator accessories. The top handle opening design allows you to access the handle without removing the cover. The drawstring at the bottom helps to tighten the cover to make it fit better. ▶ Effective Hiding There is no car brand logo and generator label on the surface, which effectively hides the internal items and prevents the intentional theft of the products. ▶ 100% Satisfaction Guarantee Babylu33 aims to provide excellent products and best service for customers. You can simply return it if you are not satisfied with the product. We support 60 days full refund for return and 12 month warranty. The generator cover is made of high-quality materials, thicker than most covers on the market, and has designed many humanized designs in combination with generators and weather conditions. The vision is to provide customers with the best products. If you live in an area where there are frequent rains, snow falling, heavy winds, or dust storms, you must buy a outdoor generator cover that provides full coverage to your generator. Product DetailsWith nice drawstringsThere is a drawstring at the bottom,which can be tightly fixed on the engine.With a large tools bagThere is a tool bag attached to the side of the generator cover to store the tools you need.With nice HOOK&LOOP tapeAt the top of the cover ,there is an open design for you to reach the handle ,open the hook&loop can remove it. 1. Something you should pay attention to before you buy this cover1. Which generator models does this cover fit？FIT for Honda Generator EU2000i, EU2200IC, EU2200i, EU2000i Camo, EU2000i Companion, for Tacklife 2250w iPower 2000 Yamaha for Westinghouse iGen2600 etc.2. What’s the size of this cover?14” length 10” width 15” height(14” x10” x 15”)NOTE: All dimensions are measured manually with deviation （ranged）at 0.1~0.5in. If by any chance they are not, we are sorry for that.So please confirm whether your model fits this cover before you buy it. 2. Something you should pay attention to when you use the cover Do not use the generator cover near heat or open flame. Do not cut the generator cover with sharp props and other hard objects. For care and use, please let your generator cool down first before covering. Clean it with a damp duster or by hosing with clean water. Pakage include: 1 x Generator Storage Cover PaymentDelivery detailsTerms of salesContact usPayment1.All Payments must be Confirmed (Shipping and billing addresses must match) Payment is required within 7 days from the date of the auction ending.2.We accept PayPal, MasterCard, Visa, American Express, Discover and etc payment. Delivery details1.Orders will be ship out within 1 business days after payment has cleared. (Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. )2.All of the items are shipped from our Warehouse in USA.United states 2-5(days)3.Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description.Terms of sales1.100% Satisfaction Guarantee: If you’re not 100% satisfied with babylu33 items, simply return it for a full refund in 60 days (Items must be in new condition and in original package). Kindly please feel free to contact us before return. 2.Return or Replacements: Support 12 months’ Warranty. All product will be tested in 100% before delivery. If the item is was damaged in transit, kindly please contact us for a replacement or refund (Excluding contrived damage or misuse).Contact usAny question, please don’t hesitate to let us know. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. your understanding and patience is much appreciated!
HND1.2CD Dual System Extended Run Generator Fuel Kit works with Honda EU2200, EU2000, EU1000 / Polaris P1000I / Champion 2000 (gravity fed) / Generac 800, 1600,1400 / Kipor 770, 1000, 2000, 2600. These Dual System with Hose & Cap, plug and play system takes a breeze to install.
Specifications: ▶ Application:This fuel gas cap can be widely used in Honda EU2200i EU1000i, EU2000i, EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT generators. ▶ Function:As a fixed connection between plastic or rubber hose and pipe, this gas cap with brass hose fitting helps you add gasoline into generator within a safe distance, ensuring seal tight and no leakage. ▶ Design:The brass hose fitting has a 1/4″ male end for connecting to threaded pipe, conforming to National Pipe Thread (NPT) standard and the barbed fitting for a hose is equipped with a 1/4″ inside diameter. ▶ Material: The gas cap is made of premium CNC billet aluminum, finishing with stylish anodized red coat. And the hose fitting is made of top high quality and wear resistance brass, performing well even under extreme conditions. ▶ Satisfaction Guarantee:If you receive broken or defective gas cap and brass hose fitting, please contact us any time, we will compensate you with 1 year warranty or 60 days full refund. UPGRADE YOUR HONDA GENERATOR! Color: Sliver/Red Size: Upgrade Extended Cap with Brass HoseApplication: Fit for Honda EU2200i EU1000i EU2000i EU3000i Handi, Champion 2000watt, Westinghouse 2200watt WH2200iXLT Generators.Material: Fuel gas cap – premium CNC billet aluminum, finishing with stylish anodized red coat Hose fitting – top high quality and wear resistance brassDesign: The extended gas cap has a machined 1/4″ NPT port on the top and includes 1/8″ thick Buna N fuel resistant sealing gasket. The brass hose has a 1/4″ inside diameter x 1/4″ male NPT. Package Includes: 1*Fuel Gas Cap 1*Brass Hose Fitting PaymentDelivery detailsTerms of salesContact usPayment1.All Payments must be Confirmed (Shipping and billing addresses must match) Payment is required within 7 days from the date of the auction ending.2.We accept PayPal, MasterCard, Visa, American Express, Discover and etc payment. Delivery details1.Orders will be ship out within 1 business days after payment has cleared. (Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. )2.All of the items are shipped from our Warehouse in USA.United states 2-5(days)3.Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description.Terms of sales1.100% Satisfaction Guarantee: If you’re not 100% satisfied with babylu33 items, simply return it for a full refund in 60 days (Items must be in new condition and in original package). Kindly please feel free to contact us before return. 2.Return or Replacements: Support 12 months’ Warranty. All product will be tested in 100% before delivery. If the item is was damaged in transit, kindly please contact us for a replacement or refund (Excluding contrived damage or misuse).Contact usAny question, please don’t hesitate to let us know. We try our best to reply to your emails as soon as possible, due to high volume of daily incoming emails, we may not be able to reply your emails immediately. Please allow 24 hours for us to response. your understanding and patience is much appreciated!