When the CO concentration exceeds 150 mg/m³, the alarm light will begin to flash, and the generator will shut down within 10 seconds. During this period, the machine will not start normally. Pull the starter rope firmly.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. When the CO concentration exceeds 150 mg/m³, the alarm light will begin to flash, and the generator will shut down within 10 seconds.
Peak Watts 4800W. Starting System Recoil Start. Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. When the CO concentration exceeds 150 mg/m³, the alarm light will begin to flash, and the generator will shut down within 10 seconds.
Recoil Start. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start). If it starts, turn to ON and run normally.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
Starting System Recoil Start. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start). If it starts, turn to ON and run normally.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
