Peak Watts 2500W. Recoil Start. Pure Sine Wave Inverter Generator Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition.
⚡️ 【𝐀𝐃𝐕𝐀𝐍𝐂𝐄𝐃 𝐒𝐀𝐅𝐄𝐓𝐘 𝐅𝐄𝐀𝐓𝐔𝐑𝐄𝐒】 1. ⚡️ 【 𝐑𝐔𝐍𝐒 𝐐𝐔𝐈𝐄𝐓𝐋𝐘 𝐀𝐓 𝐔𝐍𝐃𝐄𝐑 𝟓𝟓 𝐝𝐁𝐀】 Operates at just <55 dBA, quieter than a conversation.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
Peak Watts 2500W. Pure Sine Wave Inverter Generator Recoil Start. Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition.
Peak Watts 2500W. Pure Sine Wave Inverter Generator Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition.
Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
Peak Watts 2800W. Starting System Recoil Start. Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition.
Peak Watts 2500W. Pure Sine Wave Inverter Generator When the CO concentration exceeds 150 mg/m³, the alarm light will begin to flash, and the generator will shut down within 10 seconds. During this period, the machine will not start normally.
⚡️ 【 𝐑𝐔𝐍𝐒 𝐐𝐔𝐈𝐄𝐓𝐋𝐘 𝐀𝐓 𝐔𝐍𝐃𝐄𝐑 𝟓𝟓 𝐝𝐁𝐀】 Operates at just <55 dBA, quieter than a conversation. ⚡️ 【 𝟏𝟎-𝐇𝐫𝐬 𝐑𝐔𝐍𝐓𝐈𝐌𝐄 @ 𝟐𝟓% 𝐋𝐎𝐀𝐃 】 The 1.1-gallon (4.2L) fuel tank with a Fuel gauge.
Peak Watts 2500W. Pull the starter rope firmly. After the generator runs for a few seconds, turn the knob from CHOKE toON, and the generator will enter normal working condition. If the start distance is too short, you need to turn to CHOKE and pull the starter rope once (at this point, the generator will most likely not start).
